DESCRIPTION

 

The goal of the Die Setter is to provide expert support in the area of injection molding to the manufacturing operation.  It is both a “hands-on” and supportive role where consistent, quality parts are produced at effective rates.  As such, the Die Setter must operate with urgency and dedication to do “whatever it takes” to meet the customer’s requirements, in a safe working environment, and a positive team atmosphere.

The role is required to maintain the control of processes in injection molding. This person also provides support to the execution of the production schedule including anything from component changes, setups and startups. This role reports to the Process Engineer and supports the Lead Operator.

 

ESSENTIAL DUTIES AND RESPONSIBITILIES

 

  • Responsible for all mold changes done per the production schedule
  • Responsible for the proper set-up of all molds and related functions such as watering of the mold, knockout, hot runner etc. for injection molding machines
  • Repair any fluid or air leaks relating to the mold
  • Responsible for the pulling and resetting of all mold halves, specifically for the purpose of mold repair
  • Monitors and prepares auxiliary equipment as needed in the production area
  • Maintains the orderly appearance of the mold storage area, including all end of arm tooling
  • Responsible for the orderly appearance of all mold-setting supplies including the removal of all supplies from the molding machines and immediate area
  • Adheres to all mold change policies
  • Coordinates and monitors the execution of the production schedule
  • Completes all necessary mold in/out paperwork.
  • Assists the Process Technician when needed; Verifies paperwork for jobs and completion of inspections at start up of jobs and in process inspections
  • Comply with all internal and OSHA required safety procedures
  • Trains back-ups

MINIMUM QUALIFICATIONS

Education

  • High school diploma or equivalent preferred, but will consider experience in lieu of education
  • Some technical training in related field preferred

Work Experience

  • Experience in a general manufacturing or warehouse environment
  • Have exposure to maintenance problems
  • Be familiar with controls on machines, robots and overhead cranes

 

REQUIRED COMPETENCIES

  • Decision Making– identifying and understanding issues, problems, and opportunities; comparing data from different sources to draw conclusions; using effective approaches for choosing a course of action or developing appropriate solutions; taking action that is consistent with available facts, constraints, and probable consequences
  • Initiating ActionTaking Prompt action to accomplish objectives; taking action to achieve goals beyond what is required: proactive
  • Innovation-generating innovative solutions in work situations; trying different and novel ways to deal with work problems and opportunities
  • Managing Work-effectively managing one’s time and resources to ensure that work is completed efficiently; reports for work and returns from breaks and lunch in a timely manner
  • Safety Awareness-being aware of conditions that affect employee safety
  • Communication – Clearly conveying and receiving information and ideas through a variety of media to individuals or groups in a manner that engages the audience, helps them understand and retain the message, and permits response and feedback
  • Teamwork- actively participating as a member of a team to move it toward the completion of goals

 

SKILLS AND KNOWLEDGE

  • Must qualify for fork lift license according to company standards
  • Ability to read and interpret blue prints
  • Knowledge of the injection molding process and the properties of the materials processed
  • Ability to work under minimal supervision in a fast paced environment
  • RJG knowledge is a plus
  • Ability to read, write and communicate in English to comprehend and follow written procedures, container labels and safety precautions
  • Ability to meet tight deadlines
  • Good attention to detail
  • Reliable attendance
  • Must have a demonstrated mechanical aptitude

 

SPECIAL REQUIREMENTS (Physical, etc)

 

The person must have good motor skills and the ability to lift 60 lbs. The role requires standing for up to 8 hours, lifting, turning, twisting, safety gate operation, reaching, pulling, pushing, clutching, and placing. In addition, visual acuity to detect process flaws is needed and the ability to operate forklift truck safely.

 

Pay depends on experience.

 

Please come to the EMI Batesville Office at 103-11 Woodland Rd, Batesville, MS 38606 with an updated resume for consideration.

DESCRIPTION

A company is seeking an experienced Injection Molding Mechanic for its Batesville, MS facility. This is a high profile position with the opportunity for advancement. The qualified individual must be able to repair and maintain injection molding machinery and mechanical equipment such as motors, pneumatic tools, hydraulics, conveyor systems, electrical devices and other secondary equipment such as Martin Machines and Heat Transfer machines.

 

ESSENTIAL DUTIES AND RESPONSIBITILIES

 

  • Recommend improvements to equipment and processes to enhance quality and productivity
  • Documentation-the ability to fill out process sheets; and to perform safety checks on molds and machines
  • Perform routine preventative maintenance checks on all production equipment and machinery
  • Replaces and repairs parts on machines such as bearings, filters, wiring, valves, gauges and switches
  • Adjust functional parts of devices and control instruments
  • Replaces electrical parts and equipment
  • Observes and listens to mechanical devices in operation to locate causes of trouble
  • Dismantles devices to gain access to and remove defective parts
  • Examines form and texture of parts to detect imperfections
  • Inspects used parts to determine changes in dimensional requirements
  • Repairs or replaces defective parts. Installs special functional and structural parts in devices.
  • Lubricates and cleans parts
  • Start devices to test their performance
  • Required to participate in on-call program and may be required to work additional hours as required
  • Performs other related duties as assigned
  • Follows all safety rules and procedures and observes the operations to insure a safe environment.

 

MINIMUM QUALIFICATIONS

Education

  • High school diploma or equivalent

Work Experience

  • 2-3 years in a shop/production environment
  • Knowledge of hydraulics, pneumatics and electrical is a must

 

Pay depends on experience.

 

Please come to the EMI Batesville Office at 103-11 Woodland Rd, Batesville, MS 38606 with an updated resume for consideration.

Duties and Responsibilities

  • Produce product by operating all equipment in the department. Set up, adjust and troubleshoot equipment, including automated operations, controls, and sensors.
  • Review programs on numerical and PLC equipment and adjust offsets. Communicate with Facilitator and Maintenance Techs about required ladder logic and PLC troubleshooting.
  • Perform preventative maintenance responsibilities. Participate in updates of preventative maintenance schedules. Complete routine equipment and product inspections and complete required documentation.
  • Investigate and efficiently assist with diagnosis and resolution of equipment and quality problems, production delays or stoppages. Participate in performing root cause analysis and assist with implementing the best solution.
  • Troubleshoot and perform minor equipment repairs. Provide feedback to Maintenance and Facilitator as needed.  Learn and complete corrective actions as directed.
  • Inform Facilitator or Department Manager about processes or equipment requiring attention. Complete documentation as required or requested.
  • Recommend and participate in completion of continuous improvement projects specifically designed to improve processes, productivity and quality, especially those related to corrective actions.
  • Complete other duties as assigned by the manager/facilitator, including working other shifts as necessary.
  • Adhere to all safety requirements in the work area.
  • Practice 5S

Knowledge, Skills, and Abilities

  • Must demonstrate good written and oral communication skills.
  • Able to interpret technical data, including drawings and schematics, accurately.
  • Must be proficient in the use of common inspection and test equipment.
  • Excellent problem-solving and analytical skills required.

Education and Experience Requirements

  • High School or GED diploma required plus Technical Certification in a Mechanical, Electrical, Automation or related program or equivalent combination of education and experience in maintenance, mechanical, or technical field.
  • Minimum of 1-2 years of experience in maintenance, mechanical, or technical field at MT or similar employer.

 

Please send resumes to raven@emistaffing.com for consideration.

Job Responsibilities:

  • Handle cash, credit or check transactions with customers

  • Scan goods and collect payments

  • Ensure pricing is correct

  • Issue change, receipts, refunds, or tickets

  • Redeem stamps and coupons

  • Count money in cash drawers at the beginning and end of shifts to ensure that amounts are correct and that there is adequate change

 

IMMEDIATE OPENINGS in Batesville.

Please come to the EMI Batesville Office at 103-11 Woodland Rd, Batesville, MS 38606 or call 662-563-5888 for consideration.

3rd Shift Position

Position Description:
Operator joins tubing, sheet metal and studs together by brazing, welding or soldering, using tools such as oxygen acetylene torch, arc welder, heliarc, stud welder and tig weld.

 

Key Responsibilities:

  • Ability to interact with others and be self-motivated to maximize production.
  • Read and understand blue prints.
  • Operate and read all measuring devices
  • Organize and set up work.
  • Required to stand constantly, walk occasionally, bend frequently, squat occasionally, and reach forward frequently. These motions are sustained and repetitive.
  • Good safety habits are a must as caution is required in preparing the welder for operation. Safety glasses are required at all times, and to avoid eye injury a welding helmet is required when engaged in actual welding activity. Employees are required to frequently lift up to 50 lbs. or more with assistance and must use proper body techniques when performing floor, knee, and waist lifts.
  • Welder is exposed to heat and fumes that may be somewhat disagreeable.
  • Requires employee to perform other jobs in the cell as needed.

Position Requirements:

  • High school diploma or GED.
  • 2 years welding experience preferred.
  • Must be able to be 6G, 3F and 5F certified by an outside welding certification body.
  • Requires ability to use MIG/TIG welders to join metal to close tolerances. Various metals may be required, some of which are galvanized steel, aluminum, copper, and stainless steel.
  • Requires ability to read and interpret complicated shop drawings.
  • Requires understanding of standardized welding symbols used on shop drawings to convey method of welding.
  • Requires a strong mechanical background as well as the ability to use simple math with both decimals and fractions.
  • Must wear safety protective equipment at all times.

Please send resumes to nathan@emistaffing.com for consideration.

Job Responsibilities:

  • Receiving merchandise
  • Unloading or unpacking
  • Marking merchandise to be identified
  • Stocking shelves

Please come see Latoria at the EMI Grenada Office at 142 South Main Street, Grenada, MS for consideration.

2nd Shift Position

3pm-11am

 

Job Requirements:

  • Loading and unloading trucks of material to and from designated areas.
  • Move, relocate, stack, and count material.
  • Putting material into machine hoppers.
  • Work in varying temperatures, depending upon season.
  • Frequently lift up to 50 lbs.
  • Counting material daily.
  • Must be able to work OT if necessary.

Please send resumes to samantha@emistaffing.com or latoria@emistaffing.com for consideration.